| View Blog
|
| My's Holographic Theory! Part one------Circular Me
|
|
|
|
Today I want to show you some of my technical theory. That is all come from my research in the ten years. Three of the main idea I would be discuss here, that is included my holographic idea (Toby’s Holographic), magnetic cell, light recycle system and my solar concentrator with solar tracker.
There will be only show you’re some mirror part of my result and some mirror part of my concept, and most of the details will be my secret.
The first topic is holographic, the following web site have shown most of the classic holographic idea. http://www.holophile.com/history.htm
And the application of the holographic today is mostly related to Magnetic Resonance Imaging (MRI) http://en.wikipedia.org/wiki/Magnetic_resonance_imaging My holographic idea is mostly related to the classical idea of the holographic technology. those method are related to compare the image by and source information and the reference information. I wish that can be contribute all the inspection system become much faster and much cheaper. Howevere I will mostly focus my research on vision image application, my holographic also can apply to ultra-sonic and heat transfer. There have three of the method to achieve my hologrhic idea, parallel method, circular method and object locked method(discuss later). The parallel method is used to camera in parallel to and compare the location different of the target in the two different image. This is an exist method apply to the three dimension movie. But that’s method have a dis-avdventage on the sensive and accurate is too low for the inspection purpose. However I have my own modurated idea for the parallel method, here is better that’s to discuss my circular method for inspection.
Example1: mango location recognise by circular method(Aussume, the camera vision is parallel with the ground. Then we can ingore the y-axis for our calcultion. Because the object will have a simular high in this way and we can aussume the high measure from left and right camera are same.)
(1)
the picture what shown the concept of my circular method, there have two camera and two reference screen. There the center of the two sceen is same and make 30 degree diffent between each other.
The locus equation for the left hand screen è -4(z + xdot(sin15)) = x + xdot cos15
The locus equation for the right hand screen è 4(z + xdot(-sin15)) = x + xdot cos15
Then, we can find two loci equlation form two screen. And the intersection of the two screen is three dimensional location of the object.
(2)
(3)
(4)
(5)
the picture 2,3,4 and 5, have shown the image from the right hand screen camera(left camera), the image from the left hand screen camera(right camera), the inspection result form the right hand screen and the result from the left hand screen.
PS: The distane between the reference screen and the camera is 1 meter.
the xdot(right hand) = 258.140(object 1, 2) 425.318(object 3)
the xdot(left hand) = 55.067(object 1) 413.825(object 2, 3)
There is the result I were done on 9 FEB 2007. you can try to find the three dimension location of the mango for fun. And I will post my answer next week also discuss the restriction of this system.
|
|
Posted by HOLOGRAM on 2007-09-26 12:50:10 | Rating: | Views: 202
|
| |
|
|
| Blog Comments
|
|
|
|
ANSWER:
assume Y = 300,
Object1 (150,732,300,-432.859)
Object2 (336.461,300,260,269)
Object3 (422,907,300,-62,330)
the answer can be vary be different setting of the original point.
|
|
Posted by HOLOGRAM
on 2007-10-05 12:27:57
|
|
|
|
|
Ok looks like a sound theory to me. :)
|
|
Posted by Rainbow
on 2007-10-19 17:33:38
|
|
|
|
|
|
